Atomic Magpie

By Sarah from Atomic Magpie

Itching to revamp something, this little table was basically a throw away I decided to play with. Nothing vintage about it, this particle board decorator table was plain, ugly and pretty hopeless, so with little to lose I went to town.

I removed the legs, the only real wood component, and lightly sanded the pressed wood table top. It had some raised water damaged spots, so I knew painting wouldn’t be enough to fix it. The trim was plastic faux wood, also virtually impossible to do much with. I used Kilz Spray on Primer to prime the table top and trim.

While that dried, I sanded the legs and used Minwax Gel stain in Hickory to stain them a lovely rich color. I’m obsessed with gel stain since it saved my last makeover project from disaster. It just goes on so smoothly, with little prep and still lets the gorgeous wood-grain shine through.

I used Rustoleum’s Gold Metallic paint to spray the trim and edge of the table top. I did two light coats and 24 hours later I used Mod Podge to affix some awesome peacock paper I had to the table top. I did 3 layers of Mod Podge on top of the paper, and on the side trim to seal it. This was my first time using Mod Podge, and even though I had followed the instructions and used a credit card to smooth the paper after adhering it, I had a little freak out moment when the paper appeared bubbly with tons of air pockets after the first coat. Not really knowing what to do next, I left it to dry over night, and was thrilled to see that once it had dried, all bubbles had vanished.

As a final little touch, I decided to pay homage to mid century table legs and I taped off the bottom of the legs and used the gold spray to create the look of metal ferrules (leg caps). A nice little cheat that turned out wonderfully.

So there you have it, a quick and easy table makeover that turned the dumpster table into a fabulous, feathery showpiece.